ACI Logo aci@acicontrols.com

MY ACCOUNT
MY SHOPPING CART
LOG IN

  Enter Stock Code, Model No., or Keywords
SAFETY SWITCHES > Slotted Lever Operated
Previous Page | Next Page | View Printer-Friendly Page
Safety Switches
Slotted Lever Operated - Non Metallic Housing

The Advance Controls Slotted Lever Safety Switch utilizes a rotating slotted lever to provide a positive means of turning "Off" the control power if an access panel, door, gate, guard, etc., is opened. The slotted lever design uses the door opening force to rotate the safety switch operating shaft, minimizing door - switch alignment problems. When the enclosure door is opened, a follower (not furnished) attached to the door slides down the switch lever arm slot, rotating the lever arm to the “Open” position. When the lever rotates past the "Open" point the normally closed contact in the safety circuit is forced open, turning "Off" the machine's control power. Since the safety switch contacts are closed only when the lever is in the “Closed” position, the machine cannot be started until the protection is re-established. The switch arm rotating point does not have to match the hinge point of the door. This allows easy installation of the switch assembly. The head of the switch can also rotate in 4 x 90 degree steps allowing input in any of 4 different positions, providing for a variety of different mounting configurations.

Ordering Information
Arm to Right
CONTACT
CATALOG
NUMBER
WT
Lbs
1 NO + 1 NC
115838
0.3
1 NO + 2 NC
119921
0.3
2 NO + 1 NC
119920
0.3
2 NC
115940
0.3
3 NC
120335
0.3

Arm to Center
CONTACT
CATALOG
NUMBER
WT
Lbs
1 NO + 1 NC
115938
0.3
1 NO + 2 NC
120330
0.3
2 NO + 1 NC
120329
0.3
2 NC
115941
0.3
3 NC
120331
0.3
 

Arm to Left
CONTACT
CATALOG
NUMBER
WT
Lbs
1 NO + 1 NC
115939
0.3
1 NO + 2 NC
120333
0.3
2 NO + 1 NC
120332
0.3
2 NC
115942
0.3
3 NC
120334
0.3
 

Technical Specifications - Contact Rating
ITEM
AC RATINGS
DC RATINGS
UL / CSA
10 Amp A600
Q300 (UL508)
IEC
AC15
DC13
VOLTAGE
250 - 400 - 500
24 - 125 - 250
CURRENT (A)
6 - 3 - 1
6 - 1.1 - 0.4

Positive forced break double contacts.
Maximum contact operating Voltage: 600 VAC, 300 VDC (UL508)
Short circuit protection: 10 Amps (max) fuse
Electrically isolated contacts allow different contact voltages.
  UL FILE NUMBER: E131787
 

Previous Page | Next Page

 

ACI Advance Controls Inc.
© 2017 Advance Controls, Inc. | 800.559.9ACI | 941.746.3221 | 4505 18th Street East, Bradenton FL 34203