ACI Logo aci@acicontrols.com

MY ACCOUNT
MY SHOPPING CART
LOG IN

  Enter Stock Code, Model No., or Keywords
IBYSS - VFD BYPASS SWITCHES > Components
Previous Page | Next Page | View Printer-Friendly Page

  • Selector Style - Handle mounts directly to IBYSS ®; non-lockable
  • Lockout Style - Handle mounts directly to IBYSS ®; meets OSHA 1910 requirements
  • Panel Mount Disconnect Style - Handle mounts to door, IBYSS ® mounts to sub panel; meets OSHA 1910 requirements for lockout / tagout; locks enclosure door
Handle Assembies for Open Switches Selector style consists of a black handle, black backplate and a legend plate with white letters. This style handle assembly does not have provisions for lockout and does not meet OSHA lockout requirements. This style handle assembly mounts directly to the IBYSS®. The IBYSS® can mount either directly to the door of the enclosure or on the internal panel of the enclosure for "open door" operation. The enclosure door is not locked and can be opened in any operating position.
Handle Assembies for Open Switches   Lockout style consists of a red handle, yellow backplate, and legend plate. The assembly meets Type 4X (IP65) environmental requirements and OSHA 1910 requirements for a lockout type operator. It has holes for mounting up to three padlocks (not supplied) to lock the handle in the "OFF" position. The handle is lockable in all positions. This style handle assembly mounts directly to the IBYSS®. The IBYSS® can mount either directly to the door of the enclosure or on the internal panel of the enclosure for "open door" operation. The enclosure door is not locked and can be opened in any operating position.
Handle Assembies for Open Switches  

Panel mount disconnect style consists of a red handle / yellow backplate (alternate black handle / gray backplate), legend plate, extension shaft and extension shaft coupling. The assembly meets Type 4X (IP65) environmental requirements and OSHA 1910 requirements for a lockout type operator. It has holes for mounting up to three padlocks (not supplied) to lock the handle in the "OFF" position. The handle is lockable in all positions. This style handle assembly allows the switch to be mounted on the internal panel of the enclosure. The handle assembly is mounted on the door of the enclosure and the extension shaft joins the two when the enclosure door is closed. This style handle assembly will not allow the enclosure door to be opened unless the handle is in the "OFF" position.

Note: Panel mount disconnect style handle assembly is not available for 3 position switch.

Ordering Information: Order by the Catalog Number shown below.

IBYSS®
Switch
Series
Size of
Backplate
Inch
(mm)
Handle Assembly
Selector Style
Black
Catalog
Number
WT
Lbs
 
CY017 & CY032
2.95" x 2.95"
(75 x 75)
102134
0.2
CY040 & CY063
4.1" x 4.1"
(105 x 105)
102135
0.3
CY100
5.1" x 5.1"
(130 x 130)
102136
0.7

 

IBYSS®
Switch
Series
Size of
Backplate
Inch
(mm)
Handle Assembly
Lockout Style
Red / Yellow
Catalog
Number
WT
Lbs
 
CY017 & CY032
2.95" x 2.95"
(75 x 75)
102131
0.2
CY040 & CY063
4.1" x 4.1"
(105 x 105)
102132
0.4
CY100
5.1" x 5.1"
(130 x 130)
102133
0.6

 

IBYSS®
Switch
Series
Size of
Backplate
Inch
(mm)
Handle Assembly
Panel Mount Style
Red / Yellow
Catalog
Number
WT
Lbs
 
CY017 & CY032
2.95" x 2.95"
(75 x 75)
102138
0.3
CY040 & CY063
4.1" x 4.1"
(105 x 105)
102129
0.8
CY100
5.1" x 5.1"
(130 x 130)
102130
1.3

 

IBYSS®
Switch
Series
Size of
Backplate
Inch
(mm)
Handle Assembly
Panel Mount Style
Grey / Black
Catalog
Number
WT
Lbs
 
CY017 & CY032
2.95" x 2.95"
(75 x 75)
117532
0.3
CY040 & CY063
4.1" x 4.1"
(105 x 105)
117533
0.8
CY100 & CY200
5.1" x 5.1"
(130 x 130)
117534
1.3

Note: Dimensions are in Inches (Millimeters)

 

Previous Page | Next Page

 

ACI Advance Controls Inc.
© 2017 Advance Controls, Inc. | 800.559.9ACI | 941.746.3221 | 4505 18th Street East, Bradenton FL 34203